How to Check a Used iPhone Before Buying: 7 Tests to Do in Person

A used iPhone can look flawless in photos. In person, you might find that the charging cable loses contact, the camera won’t focus, or the phone is still linked to the seller’s Apple Account. If you’ve found a deal on 999.md, Facebook Marketplace, or at a shop in Chișinău, test the phone while it’s still set up. Then ask the seller to erase it and make sure you can activate it before you pay.
1. Confirm the model, storage, and carrier compatibility
Go to Settings → General → About and check that the model and storage capacity match the listing. If you need a physical SIM card, check whether the phone has a SIM tray. With the seller’s permission, insert your SIM, make a call, and test mobile data. If you plan to use eSIM, check with your carrier that it can activate it on that iPhone. You can also check Carrier Lock in the About screen. Apple’s guide to buying a used iPhone
2. Check battery health
Go to Settings → Battery and open the battery health section. Check the maximum capacity and look for any message recommending service. If the battery is worn, find out how much a replacement costs for that model and add it to the asking price. This makes it easier to compare the deal with another iPhone that has a battery in better condition.
3. Review the parts and service history
Go to Settings → General → About and look for Parts and Service History. Depending on the model and iOS version, this section may show information about the battery, display, cameras, and other components.
If you see Unknown next to a part, ask the seller what was repaired. This label can appear for several reasons, including when a part can’t be verified or isn’t working as expected. If the section is missing, check which components that iPhone model supports in its service history. Apple’s guide to Parts and Service History
4. Test the display and Face ID or Touch ID
Open a white page, then a dark image. Adjust the brightness and look for spots, lines, or flickering. In the Notes app, draw continuous lines across the screen, including near the edges. If a line repeatedly breaks in the same spot, that area may have a touch response issue.
Ask the seller to unlock the iPhone in front of you using Face ID or Touch ID, depending on the model. If it shows an error, consider getting the phone checked before buying it.
5. Inspect the charging port, frame, and buttons
Remove the case and inspect the corners, frame, and seam where the display meets the housing. Look for dents, bends, or areas where the display appears to lift away from the frame.
Press the volume buttons and the side button. Then plug in a cable you know works, set the phone on a table, and check that it keeps charging. If it charges only when the cable is held at a particular angle, have the port checked.

6. Take a photo, record your voice, and make a call
Photograph some text up close and an object farther away to test focus. Try the front camera, then record a short video and play it back with sound. Open Voice Memos, record a few words, and listen to the recording.
During a test call, try both the earpiece and speakerphone. Ask the person on the other end whether they can hear you clearly.
7. Check Activation Lock after the reset and before paying
Once you’ve finished testing, ask the seller to erase the iPhone in front of you. When the Hello screen appears, start setup and connect the phone to the internet.
If you see iPhone Locked to Owner or the phone asks for the previous owner’s Apple Account details, hold off on payment. Proceed once the seller has removed the lock and you can complete activation. Apple’s guide to Activation Lock
Is it still a good deal once you factor in repairs? Compare the total cost with another iPhone of the same model and storage capacity. If you’re unsure about the display, battery, or charging port, message us to book a diagnostic check. Restart.md Apple repair service in Chișinău




Comments